Modern repairs don’t do without using plaster, since the walls, floor and ceiling at the finished shape should be perfectly even, be warmth and noise insulated, serve long and faithfully. If you don’t employ a coating of https://masterseptika.ru/ plaster over the rough wall, you won’t get the desired effect. In order for the plaster coating to hold reliably, to not crack and to not fall, it’s crucial to fortify it. Such a fixing mechanism would be the net.
If previously used more primitive and inconvenient materials to fortify the surface under plaster, together with the advent of mesh made of new materials to work has become considerably more convenient and quicker. Plastering mesh could be made from various materials, have different cell dimensions, shape and weight of this mesh. All this causes different results from its use.
Virtually every construction shop now includes a choice of mesh under the plaster, which have various lengths, which makes it possible to pick the best amount of material necessary for the job. The principle of working with it’s rather simple, making its use popular for the treatment of all chambers in the house, flat, office, getting excellent final results.
Plastering mesh is a very important part for the repair job, as with its use, the concluding of the walls is laid easier, and the end result is a lot longer. After plastering with the mesh the wall isn’t going to change its properties, and for that reason the background will not be threatened by rips in the joints or around the cloth itself. Painted walls would be most susceptible to the defects which look on these, so by choosing this approach, it is crucial to look after the trustworthiness of the wall and its own durability.
Any sort of cladding will be a whole lot more confidently connected to the surface, which can be properly treated, and its service life will increase several times, if the surface was fortified and protected from all types of influences and unpleasant environmental factors.What to choose?
If we believe the metal kind of grids, then there are their own standards by which to choose one or the other alternative. These comprise:
- The quality characteristics of the raw material, that is taken for the production of the rod or cable. It’s desirable to have information concerning the metal quality of the steel from which the net is created, which will reveal how high quality the product is.
- The expense of steel will be higher at small dealers, therefore for large batches should use to the businesses that take action. Large turnover of the product gives an opportunity to recover it, and therefore do not exhibit too high of a price.
- The quality of the rods themselves, the existence of galvanized coat. Non-galvanized mesh can be used for interior works, if it is used for outside and not covered with a distinctive chemical, it will soon corrode and traces of rust can reach the outer layer of finish.
- It’s imperative to select the right sort of grid. If it is welded, it is going to hold plaster greater than just twisted. This is important when working with a brick wall or aerated concrete away from the home, where the plaster layer can attain considerable size.
- The rods should have a clearly rationed thickness of the sticks, so when picking a net, you should focus on the GOST norms in each package.
Plastic variant of the grid for plaster is not inferior to all of the aforementioned choices, it can be used on any surface, indoors or outside, such as the plinth and facade. The only situation where it is worth turning all the exact same into the grid of steel, is going to be the presence of a thick coating of plaster, and this has a lot of fat, in the other scenarios, contemporary grids will be much more suitable to do the job.
With a plastic variant requires the selection of the perfect size net, which is often decreased to values of 6 mm, but you can choose another alternative, depending on the wishes and advantage in the work.
