Rarely does anyone in the dacha construct a capital shower made of brick or cinder block. Usually its use is limited to 3 summertime and during the planting of their vegetable garden, in addition to harvesting. For such a short period it’s sufficient to construct a light cabin out of any sheet material. Not a bad choice is a shower for dacha from polycarbonate having a changing room, which isn’t tricky to design and create yourself. Why it is Much Better to select polycarbonate for lining the shower
Polycarbonate is not the only substance for cladding a dacha shower. With this case with success will fit exactly the profiled sheeting or batten. Just today we decided to stop just with this gorgeous and durable stuff.
Let us consider the advantage of utilizing polycarbonate for cladding the shower along with other similar substances:
- In the event the benefits of polycarbonate have persuaded you, let us move on to another stage of constructing a bathtub for dacha.
- A Couple of important tips about the development of the layout of a country shower using a changing room
Even such a simple construction, as a shower out of polycarbonate for dacha demands the creation of this project. It’s not essential to develop complex drawings, and also a simple strategy could be sketched out. Here you need to instantly decide for yourself exactly what you would like to build a shower. Very fast you can make a lightweight stall and only put it on the ground. More complex in the production of shower on the foundation with water heating, but such a design will last longer. Additionally, at a dacha shower you’ll be able to bathe in sunlight.
- Construction of a dacha shower starts with determining its place. It is important to say that the tank ought to be continuously full of water. Doing this in Saved from afar is embarrassing and difficult. It’s much better to put the shower stall close to the water consumption.
- In the event the dacha shower will probably bathe a lot of individuals, it should be placed as close as possible into the cesspool or septic tank. Close installation dacha shower near the cesspool will definitely save on laying sewer pipes, however it’s desirable not to attract the stall closer into the accumulator of impurities nearer than 3 m. On warm days, bad smells in the sewer system will penetrate the shower, creating an unpleasant atmosphere while bathing.
- The water in the tank during a summer shower is warmed by sunlight. The stall should be placed in the sunniest place, where there’s not any shade in the trees and tall structures.
- Inside the shower booth and shifting room from polycarbonate should provide light https://shtorymax.ru/, which means you may bathe at night. Only it’s crucial to consider that the lights need to have a high level of protection against water. It is optimal to put shower cabins on the back of the house. Here are closest to this sewer, water source and not far to pull on the electrical cable for lighting.
- Decided on the area of the positioning of this summer shower, start to make a scheme of the cottage itself from polycarbonate. Originally it had been determined that the backyard shower will be using all the changing room. In case the normal for the size of the normal shower stall 1x1h2,2 m, then the locker area might have to add a period of about 0.6 m. In this case, the width of the layout tends to turn out 1 m, and the duration of 1,6 m. If the owners are obese people, then the width of the shower cubicle with a locker room is better to grow to 1.2 m.
- in the shower stall provide separation. Separate the dressing room threshold, in addition to tarpaulin curtain. They won’t enable the water to wet clothes and shoes.
- If desired, the dressing area could be organized from the anteroom. Then, near the shower enclosure individually set up extra racks, to that fix sheets of polycarbonate. The dimensions of this pre-bath depends on the tastes of the operator. Sometimes cottagers build larger pre-baths at which, along with the dressing room, equip a recreation room. Inside you will find seats and a desk.
- The total height of this shower cabin from ground to roof is 2.2 m. along with the tank it could attain 2.5 m, and even greater. The height in the shower stall will likely be reduced. Part of the space below will have a wooden tray, and the shirt will hang on a watering can with a tap not less than 15 cm.
Given all these variables, on a bit of paper sketches the plot of the shower using a polycarbonate dressing room, then proceed into its construction.
