The Best Way to make a pool at a polycarbonate greenhouse

The outdoor pool is a superb spot to relax. However, with the onset of cold weather, the bathing season finishes. Another disadvantage of an outside swimming pool would be that the rapid clogging with dust, dirt, leaves and other debris. If you build a pool at a greenhouse in your dacha, the closed bowl will be protected from the damaging impact of the natural environment, and also the bathing season can be extended till the start of frost.

Types of greenhouses for a Pool

Traditionally organize on a backyard plot pool in a polycarbonate greenhouse, but the definition of the kind of construction is not limited to the selection of masking material. In the massive amount of evaporation inside the building is constantly maintained high levels of humidity. Not every material will be suitable for the frame of the greenhouse. Wood will rot fast, and black metal will be destroyed by rust.

The next important choice is the shape. Besides aesthetics, the greenhouse for the pool has to have the ability to withstand wind loads and a massive amount of precipitation.

A beautiful and durable pool at the greenhouse at the cottage will get the following kinds:

Semicircular roof design is easy to create, as polycarbonate is easy to bend. The arch is resistant to strong gusts of wind. Greenhouses of this form are built over fonts that are round. The design isn’t simple to make and spends a lot of stuff.

A Couple of slopes. The simplest variant of a greenhouse for a font with horizontal walls is simple to erect. However, the polycarbonate construction is weakly stable, afraid of strong winds and heavy precipitation. A variant with a single slope is not suitable for snowy regions. Usually such greenhouses for swimming pools consist of a horizontal wall, passing into a big semicircle. The building of polycarbonate is hard to make and requires proper positioning relative to the frequent wind direction.

Deciding on the shape of a polycarbonate shelter depends upon the size of this pool, as well as how many men and women are counted on the resting area.

According to the dimensions of the greenhouse comes from:

The polycarbonate construction is made only to protect the water out of clogging, acting as a cover. Over a little pool more often put hinged shirts, and massive fonts are equipped with a sliding method.

High. Looking at photographs of the pool in a polycarbonate greenhouse, you can confidently call the structure a real location of rest. Inside under a transparent dome have a folding furniture, plant ornamental greenery, spend heating.

Covered with polycarbonate high greenhouses outfitted with doors that are wide. Do doorways create sliding, with the top lift or hinged.Benefits of indoor pools

Pool with a cover of polycarbonate has lots of benefits:

• Polycarbonate and metallic profile to the framework are considered https://moyakovka.ru/ an environmentally friendly substance. No compound aromas will accumulate inside the greenhouse out of heating the construction under the sun.
• Polycarbonate cover for the pool is durable and lightweight. If necessary it could be transferred to some other location.
• Within the greenhouse a greenhouse effect is created. It reduces the intensity of water evaporation from the pool, lessens the risk of reproduction of damaging microflora. The pool beneath the polycarbonate dome is protected from debris clogging.
• Lightweight materials are suitable for self erection of their shelter.
• Polycarbonate pavilion has good light permeability. The material is affordable and can last up to 10 years.
• The pool under the shelter will remain clean. No rust will crumble in the stainless profile, and dirty polycarbonate can be easily wiped off with a rag.

Of the downsides, there is 1 point. Polycarbonate is afraid of powerful mechanical effects. To make certain that the shelter is not damaged by falling branches, the pool is not placed under trees.

Important: To pavilion for the pool for a long time to function, to cover use polycarbonate sheets of thickness less than 8 mm.

Selecting the Sort of fonts and setup methods

If we briefly think about how to make a pool at a greenhouse from polycarbonate, the work starts with the choice of size. The fonts should be sufficient for many members of the family to visit in precisely the same time. According to the type of installment of these bowls are buried, partially embedded or installed on the surface. The latter type may have a frame pool in a greenhouse of polycarbonate or a small inflatable bowl. The most dependable is considered a fully buried font. In the dacha you can make a bowl below a dome of polycarbonate of two kinds:

A reinforced concrete ribbon is poured directly inside the pit. In the base of the pit, a cushion of sand with crushed rock is pumped along with a reinforcing mesh is laid. To begin with, the bottom of the bowl has been poured from the mortar. After the concrete hardens, set the formwork to the pouring of the walls. The finished bowl is coated with primer onto the exterior and tiled, painted or otherwise finished indoors.