Blueprints of stairs, introduced on the web, make it simple to pick the ideal option. But every house has its own design attributes. Thus, ready-made solutions might not operate. Yes, also left by his own hands drawing, and that will later be installed stairs, is going to be a special source of pride of their owner before relatives, neighbors, friends.
To begin with, ascertain the positioning of the future design and create the following measurements:
- The height of the opening. Since the basis has been taken the finishing flooring, the first and second floors. The distance from you to another is the required parameter.
- The diameter of the opening. It must be noted that it may have another configuration: by the most widely used – rectangular to shaped (circle, oval or alternative non invasive performance). This parameter significantly impacts the selection of layout.
- Height from the ceiling into the floor of the first floor. Ultimately will let you calculate the height of this passing along with the suitable design and construction of the stairs in the house.
Diagram and drawing of the stairs with dimensions in https://masterprofnastila.ru/ height and width. Draws a scale plan of the first floor at a private home. A place is set for the start of the stairs, the duration of the flight of staircase is marked on the ground. In case the design of this first floor at the area of this construction has projections, door and window openings, niches, communications, and then they are drawn in the scheme with a reference to the supporting structures. These prevent them from multiplying at the design phase. The further details and dimensions in the plan, the fewer problems during installation.
Before Creating a drawing, then you should carefully examine the building standards for stairs:
- The depth, width, height of these steps along the whole length of the structure should not change. This ensures the ease and safety of motion;
- The width of this stairwell for directly flights of stairs must be from 900 mm, for spiral constructions from 800 mm
- The height of this weapon 900-1200 mm.
For penalizing layouts on the narrowest part of 100 mmon the wide to 400 mm, at the middle of 200-250 mm. Overhang of treads around 50 mm is permitted;
- The elevation of the steps ought to be in the scope of 100-180 mm;
- The angle of slope around 45˚;
- When the stairs go straight to the door, is outfitted with another platform width of at least a meter;
- The recommended number of steps for you airport – 18 pcs. For the conducting steps -16 pcs;
- The elevation of a passing less than 1 900-2 000 mm (minimum distance from step to the floor of the second floor);
- The thickness of this material for the layout.
- Proper drawings of the staircase to the second floor could be made just on the grounds of those parameters and additional calculations. Each type of construction has its own attributes.
There are several ways to compile layout documentation:
- Independently. Create a calculation and perform staircase drawing for simple designs (directly, rotary using a stage ) under pressure for all. More complex choices are much better left to professionals;
- Ready-made options. Drawings of stairs presented on the Internet could be provided with comprehensive detailing and with no. Such projects must be checked for compliance with calculations and building regulations. For information, you can turn to professionals.
They allow you to earn a thorough design, to find a visualization of the structure before setup and to make adjustments. Employing 3D images you may see how the staircase will fit into the surrounding inside.
