Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;

for connecting the Atlantik V2.X to your property Wi Fi router you have to proceed with the 11 actions.

1. Turn fully off all units.

2. Switch on just the very first product you will link.

3. In your tablet select the wifi-socket.

4. Start Chrome from your own type and tablet 192.168.1.100 into the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your system SSID and password. ( Encryption constantly Disable : ( the system think it is automaticly )

9. Head to system within the twoo primary menu, and then click restart.

10. Head to wifi establishing once more and alter to your community router SSID.

11. get the Orphek software and do search id, it must discover the unit that is first.

Then do from 1 to 11 when it comes to staying devices.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

Within the SSID field you shall key in your system title. This really is situation delicate so make sure to make use of money or tiny letters so it really is proper. Into the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )

Select /Keep ,disable within the encryption field (don’t confuse with encryption key field). Your tablet will find the encryption automatically key in the event your router supports it.

9. Into the left that is upper of UART display you certainly will a range of fundamental, Advanced, and System.

Click system TAB plus in the section that is first of web page you will observe a restart switch. Press the restart key. a screen look saying the browser cannot connect with the internet protocol address. This is certainly fine since you should want to connect with your router SSID.

10. On the tablet /Phone connect with your wi-fi Router network SSID.

The clear button on the upper right of the screen 11.Open the Orphek app and click. Now click on the search switch situated on the top left of this display. Your system should discover the tablet as well as your IP that is new address your Orphek light should appear.

Perform actions 1 to 11 for the staying Orphek devices.

* choice : you are able to set the internet protocol address fixed , for better connection

You will then check out:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your residence router. For instance:

In the event the router is 100.168.20.1, you’ll be able to enter 100.168.20.2 or any internet protocol address between .2 and .254.

the internet protocol address should be unique or even it will probably result in an internet protocol address conflict

C. It’s also wise to go into the submask plus in many cases it really is 255.255.255.0.

D. Go into the Gateway Address : it ought to be your Router internet protocol address

E. Then perform some exact exact same towards the units that are remaining. BUT etch unit should have IP address that is unique .

instance:

When your House Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

then chances are you should set device 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the primary menu, and then click restart.

12. get the Orphek software and do search id, it must discover the unit that is first.

you then should set product 2 вЂ“

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )